Skip to product information
1 of 1

McKee's 37

Xtreme Water Spot Remover Gel 16 oz. - INCLUDES TOWEL & APPLICATOR!

Xtreme Water Spot Remover Gel 16 oz. - INCLUDES TOWEL & APPLICATOR!

SKU:MK37-990

Regular price $24.99 USD
Regular price $32.97 USD Sale price $24.99 USD
Sale Sold out
Quantity
<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>

Free bonus!  Receive a microfiber towel and applicator pad with your purchase. 

Say goodbye to stubborn water spots for good!

McKee’s 37 Xtreme Water Spot Remover Gel is a thick, acid-based gel that quickly and effortlessly dissolves stubborn water spots from paint, glass, chrome, and other vehicle surfaces.  This fast-acting formula completely removes the water spots before they cause permanent damage by etching the surface.  Besides multiple uses around your automobile, Xtreme Water Spot Remover Gel can be used around the household to remove calcium build up from glass shower doors too.  This high-tech formula is 100% abrasive free and instead relies on advanced chelating agents and clear-coat safe acids to restore a sparkling, spot-free finish.

Your first question might be: "How does this compare to McKee's 37 FAST Water Spot Remover, a product I know and love?"  Here's the deal: FAST Water Spot Remover was created as a convenient, time-saving solution since it is in the form of a spray.  Xtreme Water Spot Remover Gel is far more powerful, the ideal choice for stubborn water spots that have been present weeks or even months.  

The clear coat on your new car is only 3 mils thick, or about as thick as a piece of notebook paper! When water spots are not properly removed in a timely manner, they create unsightly craters that must be mechanically abraded. This takes hours, sometimes days, and costs hundreds of dollars. Having a bottle of McKee's 37 Xtreme Water Spot Remover Gel in your garage is inexpensive insurance for protecting your vehicle's delicate clear coat finish.  It's fast, easy, and it works extremely well on your car and around the house.

Directions:

Wear chemical-resistant gloves and eye protection before use. Shake well before use. Always test in an inconspicuous area prior to full application.

Do not apply to a hot surface or in direct sunlight. Ensure the surface is cool to the touch.

Wash the surface first to remove loose dirt and debris. Working in small sections (approximately 1 ft x 1 ft), apply a quarter-sized amount of product onto a microfiber or terrycloth applicator.

Using firm but controlled pressure, work the product into the affected area using circular or crosshatch motions.

Allow the product to dwell for 30–60 seconds only. Do not allow the product to dry on the surface.

Immediately rinse thoroughly with plenty of water. After rinsing, wash the treated area with a pH-neutral soap or diluted APC to neutralize and remove any remaining acidic residue, then rinse again with clean water.

Repeat only if necessary for severe water spotting.

Once the surface is clean and dry, apply a protective wax, sealant, or coating, such as McKee’s 37 Fast Wax, to help protect the surface and reduce future water spotting.

Warning: Avoid contact with glass, uncoated metals, polished aluminum, anodized surfaces, and other sensitive materials unless compatibility has been confirmed.

16 oz.

 

View full details