The SiO2 Ceramic Series Detailing Clay is more versatile than our standard Universal Detailing Clay Bar.

McKee's 37 SiO2 Ceramic Series Detailing Clay is a special clay compound that safely and quickly removes contaminants that penetrate below the clear coat surface. Detailing clay is the professional detailer's secret to glassy smooth paint.

Clay works by grabbing foreign particles and pulling them out of the clear coat as you rub the bar across the paint surface. Washing only removes surface contaminants, but your vehicle may still have microscopic particles embedded in the clear coat. These particles are hard to see individually, but together they can cause dull, rough patches that detract from the paint's appearance. McKee's 37 SiO2 Ceramic Series Detailing Clay will remove these contaminants and restore a glassy smooth finish to your vehicle. Once wax is applied, the paint will feel silky smooth and have a bright, glossy shimmer.

McKee's 37 SiO2 Ceramic Series Detailing Clay removes:

If contaminants are allowed to remain lodged in your vehicle's paint, they create tiny openings in the protective clear coat. Over time, air and water can enter these openings and cause widespread oxidation. Claying your vehicle periodically will prevent paint system failure and enhance the performance of your favorite wax by creating an ultra-slick surface.

Detailing clay can also be used to remove stubborn debris from wheels. Wash them first using McKee's 37 Foaming Wheel Cleaner Gel. Spray McKee's 37 Universal Clay Lubricant over wheel surface and clay your wheels just as you would clay the paint.

Since its introduction, detailing clay has been priced according to its limited demand. Now that the use of clay is more widespread, McKee's 37 Universal Detailing Clay can be offered at a price that professional detailers and at-home perfectionists will enjoy. Experience the difference clay makes on your own vehicle with McKee's 37 Universal Detailing Clay.

Spray a generous amount of Universal Clay Lubricant onto the paint and rub the clay bar back and forth until it glides freely

 Directions:

Use McKee's 37 SiO2 Ceramic Series Detailing Clay on a freshly washed vehicle. Spray area to be clayed with McKee's 37 Universal Clay Lubricant. Gently rub the clay bar back and forth across the wet surface. Clay will grab initially. Continue moving the bar until it glides freely. Wipe off clay residue. Reshape bar often to reveal clean clay as you work. The secret to preserving and extending the life of the clay material is to spray the clay bar with lubricant prior to storing it in its plastic case.